Those of you who saw the updates on instagram know this already...
Let's get to the details.
Here was the wall before.
When you walk into the room it's on your right (across from the bed wall).
There's a little entryway that I included in this project...
Here's the view from our bed.
Alright, so when I spotted this online, I fell in love:
In order to achieve this look, I needed a completely smooth base so our highly textured walls had to go. The easiest and most inexpensive way I've found to do this to cover them with these thin sheets (around 1/8" thick) of particleboard (I believe?) at Lowe's. They're only $9 for a 4x8' sheet... so cheap!
I picked up four of those of that plus two 4x8' 1/2" thick MDF panels to rip down for the strips.
The most important part of this project is planning. Seriously—you have to be thorough and meticulous.
Before I bought anything, I laid it all out on my computer to scale and this is what I came up with.
The second section on the top right is the smaller/entry wall. The two rectangles at the bottom are how I'd cut my MDF sheets, and they are color coded to make sure there was enough to cover both walls. Everything fit nicely onto two sheets and I even had some leftover.
I made the top piece 1.75" thicker, because that's the height of the crown molding I'll be running along the top—that way all the visible strips will be the same thickness.
The vertical gaps were consistent all the way around, but since the entry wall is narrower, the horizontal gap was shorter—not a big deal at all.
I also planned out the particleboard sheets to make sure I had enough:
I already had narrow section leftover from our window trim project, so I just needed four more to fill the rest. Perfect.
The total came to just under $95 (after my 5% Lowe's credit card discount) which I think is pretty amazing. The only other items needed are caulk, spackle, and paint (and of course nails and a nail gun) which I had so this project is a huge bang for your buck.
Time to get started. After clearing everything out, we had to address our TV situation. A few weeks back we had an electrician relocate the cable, hence the holes in the wall (it was coming out of the window wall on the left from outside and ran across the floor... no bueno).
We had debated on keeping the TV on our dresser or wall mounting it, and decided to go ahead and wall mount it to get all the wires and cables out of sight, free up dresser space, and for an all around cleaner look. I could take it or leave it, honestly, but it makes Brad excited so it was worth it.
We trimmed the first panel (after measuring and cutting a hole for the outlet with my jigsaw) and nailed it into place with our brad nailer and 18ga nails (no liquid nails!)
At some point I double checked my measurements and realized I made a critical error which left me with a large gap that wouldn't be covered by the vertical board (this is the setback I talked about Monday).
So, I had to scrap the board and run to Lowe's the next day for a replacement piece. But we forged on with the rest of the installation...
This paneling part was actually the biggest challenge in this entire project. Working with 4x8' sheets of anything is not fun (as learned in our ceiling beadboard attempt... aka the worst DIY project in history)
It's a challenge because you have to make sure it's completely flat up against the wall, and you secure it to the wall in a specific pattern so no air bubbles can get trapped... all while holding it steady up next to the other piece.
And because walls and floors aren't straight, your panels won't line up exactly in some places but that didn't matter at all since the seams would be hidden by the MDF boards.
We also had to cut around the beams which got a little tricky at times, since they aren't perfectly straight. But I got it close enough to where you can't really tell.
Before putting up the last board, Brad installed these outlet housings for behind the TV.
Then the fun part, trying to cut the panel so it lines up perfectly with both holes and the beam and other panels.
To make life easier, we cut that panel down into a narrower strip (which would be covered on both ends by MDF boards).
And finally, after 2 days, Phase 1 was complete.
Fortunately it only got easier from there. After ripping down our boards into 4" strips (and two into 5.75" for along the ceiling), it was onto Phase 2.
Before installation, I lightly sanded the edges to make sure everything was nice and smooth. Then I just nailed it up... super easy!
I measured and marked where my next board would go, and used a level to ensure it was straight.
A couple of them ran into beams, which I notched out using a combination of a miter saw and jigsaw.
It went by fast... nice and easy.
After the vertical pieces were in, I started with the horizontals, making sure to measure for each gap as they all varied slightly.
This part was simple too. You just have to take your time and measure carefully.
This is the fun part, when you start to see your vision come to life.
There was only one roadblock here... cutting around an outlet. I used my jigsaw—it would be completely hidden behind the TV so it didn't really matter.
Brad later added a couple blocks over the studs where the TV mount would secure to (this will all be hidden, don't worry).
About 4 hours later it was done (this was just me, so with two people it could go a lot faster).
Time for Phase 3... spackle, caulk and paint. This wasn't so bad either. Not nearly as time consuming as I thought.
I added a 90° edge piece around the corner to hide the seam.
I used fast drying caulk so I could paint the same day, and used my Mouse hand sander with 240 grit sandpaper to smooth out the dried spackle.
After thoroughly wiping everything down with damp rags, it was time to paint! I recruited Brad for this one—he rolled on the smooth edges (with a cabinet grade foam roller) while I cut in.
By the way, I'm getting much better at not having to use tape. I cut in the entire thing (around the beams, walls and floor by hand. Having an awesome short handled angled brush is so important!
I used the same paint from the plank wall behind the bed (and in the studio)—Valspar's Ocean Storm in an eggshell finish. It dries so fast and it's amazing.
A couple hours later, our wall was complete.
Now, all that's left to do is swap out that old outlet, add quarter round in the corner, and crown molding. This weekend I actually plan to trim out the entire room (finally), including baseboard, quarter round in a few places and crown molding. It's going to look so nice and finished... I can't wait.
We've already mounted the TV and tonight we'll bring in our new dresser and start setting up that wall. Our rug is also here so that will be set up this weekend as well. Lots to look forward to on Monday!